For all table finishes and for USM Haller:
- For dry cleaning, use a dust cloth *.
- For wet cleaning, preferably use a soft fabric cloth * or chamois leather; moisten it with water and wring it out thoroughly before placing it on the surface of the cabinet.
In the case of heavy soiling, only use diluted neutral detergent (pH <9).
Never leave the surface long wet, let alone wet, to avoid the risk
water absorption.
Never use sponges or abrasive detergents. Some microfiber cloths may also have an abrasive effect.
Never use solvents.

For the finishes of oiled veneer tables:
To maintain and restore shine to table finishes, we recommend oiling them every 4 to 12 months depending on use.
1. Remove superficial dirt.
2. Pass a lightly moistened cloth over the top of the table.
3. Using a cloth *, apply a thin coat of oil.
4. Then polish the surface to dry completely.

For USM Privacy Panels and USM Inos Box:
For dry cleaning, remove dust and surface dirt with a vacuum cleaner that does not have a brush.
Metal or plastic parts can be cleaned with a damp cloth *.
For wet cleaning, in the presence of encrusted dirt, use a damp cloth * and, if necessary, a mild cleaner (eg window cleaner). Rub very gently so as not to damage the surface.
In case of wear or tear, do not pull the fibers that protrude. To avoid aggravating the defect, it is recommended to carefully cut the affected fibers.

* We recommend the USM cloth.